Procedure of Designing Water Tank

• Firstly, create the base of the water tank using parametric model option in STAAD.Pro.
• Next, create the columns on the locations as demonstrated in the video using translation repeat command.
• After creating the columns at the desired locations, create the side wall of the water tank. Create the side wall using the parametric model option again.
• Secondly, after creating the model, add the plate element thickness, and assign it to the entire model.
• Further add the hydrostatic load to check the plate stress contour under post processing.
• Finally, after creating the model STAAD.Pro, transfer the model to Advanced Concrete Designer for designing the water tank.
• Here, add the design details and loads that you want to consider for the design. After performing the design, check the text schedule and detailed drawing of the water tank model.